NAME

    Test2::Plugin::Cover - Fast and Minimal file coverage info.

DESCRIPTION

    This plugin will collect minimal file coverage info, and will do so
    with minimal performance impact.

    Every time a subroutine is called this tool will do its best to find
    the filename the subroutine was defined in, and add it to a list. Also,
    anytime you attempt to open a file with open() or sysopen() the file
    will be added to the list. This list will be attached to a test2 event
    just before the test exits. In most formaters the event will only show
    up as a comment on STDOUT  # This test covered N source files. .
    However tools such as Test2::Harness::UI can make full use of the
    coverage information contained in the event.

 NOTE: SYSOPEN HOOK DISABLED

    The sysopen hook is currently disabled because of an unknown segv error
    on some platforms. I am not certain if it will be enabled again. calls
    to subs, and calls to open are still hooked.

INTENDED USE CASE

    This tool is not intended to record comprehensive coverage information,
    if you want that use Devel::Cover.

    This tool is intended to obtain and maintain lists of files that were
    opened, or which define subs which were executed by any given test.
    This information is useful if you want to determine what test files to
    run after any given code change.

    The collected coverage data is contained in test2 events, if you use
    Test2::Harness aka yath then this data can be logged and consumed by
    other tools such as Test2::Harness::UI.

PERFORMANCE

    Unlike tools that need to record comprehensive coverage (Devel::Cover),
    This module is only concerned about what files you open, or defined
    subs executed directly or indirectly by a given test file. As a result
    this module can get away with a tiny bit of XS code that only fires
    when a subroutine is called. Most coverage tools fire off XS for every
    statement.

LIMITATIONS

    This tool uses XS to inject a little bit of C code that runs every time
    a subroutine is called, or every time open() or sysopen() is called.
    This C code obtains the next op that will be run and tries to pull the
    filename from it. eval, XS, Moose, and other magic can sometimes mask
    the filename, this module only makes a minimal attempt to find the
    filename in these cases.

    This tool DOES NOT cover anything beyond files in which subs executed
    by the test were defined. If you want sub names, lines executed, and
    more, use Devel::Cover.

 REAL EXAMPLES

    The following data was gathered using prove to run the full Moose test
    suite:

        # Prove on its own
        Files=478, Tests=17326, 64 wallclock secs ( 1.62 usr  0.46 sys + 57.27 cusr  4.92 csys = 64.27 CPU)
    
        # Prove with Test2::Plugin::Cover (no coverage event)
        Files=478, Tests=17326, 67 wallclock secs ( 1.61 usr  0.46 sys + 60.98 cusr  5.31 csys = 68.36 CPU)
    
        # Prove with Devel::Cover
        Files=478, Tests=17324, 963 wallclock secs ( 2.39 usr  0.58 sys + 929.12 cusr 31.98 csys = 964.07 CPU)

    no coverage event - No report was generated. This was done to only
    measure the effect of the XS that adds the data collection overhead,
    and not the cost of the perl code that generates the report event at
    the end of every test.

    The Moose test suite was also run using Test2::Harness aka yath

        # Without Test2::Plugin::Cover
        Wall Time: 62.51 seconds CPU Time: 69.13 seconds (usr: 1.84s | sys: 0.08s | cusr: 60.77s | csys: 6.44s)
    
        # With Test2::Plugin::Cover (no coverage event)
        Wall Time: 75.46 seconds CPU Time: 82.00 seconds (usr: 1.96s | sys: 0.05s | cusr: 72.64s | csys: 7.35s)

    As you can see, there is a performance hit, but it is fairly small,
    specially compared to Devel::Cover. This is not to say anything bad
    about Devel::Cover which is amazing, but a bad choice for the use case
    Test2::Plugin::Cover was written to address.

SYNOPSIS

 INLINE

        use Test2::Plugin::Cover;
    
        ...
    
        # Arrayref of files covered so far
        my $covered_files = Test2::Plugin::Cover->files;

 COMMAND LINE

    You can tell prove to use the module this way:

        HARNESS_PERL_SWITCHES=-MTest2::Plugin::Cover prove ...

    This also works for Test2::Harness aka yath, but yath may have a flag
    to enable this for you by the time you are reading these docs.

 SUPPRESS REPORT

    You can suppess the final report (only collect data, do not send the
    Test2 event)

    CLI:

        HARNESS_PERL_SWITCHES=-MTest2::Plugin::Cover=no_event,1 prove ...

    INLINE:

        use Test2::Plugin::Cover no_event => 1;

CLASS METHODS

    $arrayref = $class->files()

    $arrayref = $class->files(filter => \&filter, extract => \&extract)

      This will return an arrayref of all files touched so far. If no
      filter or extract callbacks are provided then $class->filter() and
      $class->extract() will be used as defaults.

      The list of files will be sorted alphabetically, and duplicates will
      be removed.

      Custom filter callbacks should match the interface for
      $class->filter().

      Custom extract callbacks should match the interface for
      $class->extract().

    $event = $class->report(%options)

      This will send a Test2 event containing coverage information. It will
      also return the event.

      Options:

      root => Path::Tiny->new("...")

	Normally this is set to the current directory at module load-time.
	This is used to filter out any source files that do not live under
	the current directory. This MUST be a Path::Tiny instance, passing
	a string will not work.

      filter => sub { ... }

	Normally $class->filter() is used.

      extract => sub { ... }

	Normally $class->extract() is used.

      verbose => $BOOL

	If this is set to true then the comment stating how many source
	files were touched will be printed as a diagnostics message instead
	so that it shows up without a verbose harness.

      ctx => DO NOT USE

	This is used ONLY when the Test2::API is doing its final
	book-keeping. Most users will never want to use this.

    $class->clear()

      This will completely clear all coverage data so far.

    $file_or_undef = $class->filter($file)

    $file_or_undef = $class->filter($file, root => Path::Tiny->new('...'))

      This method is used as a callback when getting the final list of
      covered source files. The default implementation removes any files
      that are not under the current directory which lets you focus on
      files in the distribution you are testing. You may return a modified
      filename if you wish to normalize it here, the default implementation
      will turn it into a relative path.

      If you provide a custom root parameter, it MUST be a Path::Tiny
      instance, passing a string will not work.

      A custom filter callback should look something like this:

          sub {
              my $class = shift;
              my ($file, %params) = @_;
      
              # clean_filename() does not exist, it is just an example
              $file = clean_filename($file, %params);
      
              # should_show() does not exist, it is just an example
              return $file if should_show(%params);
      
              # Return undef or an empty list if you do NOT want to show the file.
              return;
          }

      Please take a look at the source to see what and how filter() is
      implemented if you want all the details on how it works.

    $file_or_undef = $class->extract($file)

    $file_or_undef = $class->extract($file, %params)

      This method is responsible for extracting a sensible filename from
      whatever the XS found. Some magic such as eval or Moose can set the
      filename to strings like '(eval 123)' or 'foo bar (defined at FILE
      line LINE)' or even nonsensical strings, or text with no filenames.

      If a sensible file name can be extracted it will be returned,
      otherwise undef (or an empty list) is returned.

      The default implementation does not use any parameters, but they are
      passed in for custom implementations to use.

      A custom extract callback should look something like this:

          sub {
              my $class = shift;
              my ($file, %params) = @_;
      
              # It is a valid file
              return $file if -e $file;
      
              # Do not use this, just an example
              return $1 if $file =~ m/($VALID_FILE_REGEX)/;
      
              # Cannot find a file here
              return;
          }

SEE ALSO

    Devel::Cover is by far the best and most complete coverage tool for
    perl. If you need comprehensive coverage use Devel::Cover.
    Test2::Plugin::Cover is only better for a limited use case.

SOURCE

    The source code repository for Test2-Plugin-Cover can be found at
    https://github.com/Test-More/Test2-Plugin-Cover.

MAINTAINERS

    Chad Granum <exodist@cpan.org>

AUTHORS

    Chad Granum <exodist@cpan.org>

COPYRIGHT

    Copyright 2020 Chad Granum <exodist@cpan.org>.

    This program is free software; you can redistribute it and/or modify it
    under the same terms as Perl itself.

    See http://dev.perl.org/licenses/